There is a big thing for WestPetro in August, the big two unit: water based mud unit and oil recovery unit is going to test in August 10. Through we will not go to attend the CIPPE 2015 Shanghai Oil Show; this is also our biggest thing in Aug.
Just as we know that water based mud unit and oil recovery unit are important system for a whole oil drilling rig and in most drilling fields, just like solid control system used in drilling work. We need these two systems to help us to finish some hard work. From the following pictures, you will find the necessary parts of the whole water based mud unit and slurry oil recovery unit. Before this, if you wanna know more information about slurry oil recovery unit, please read the post: 1 Set of Slurry Oil Recovery Unit Packaged for Indonesia-WestPetro.
The first picture is about camping house for the field drilling work, especially for the field office.
The second one is about Disc decanter centrifuge. The Disc decanter centrifuge contains the advantages of foreign similar products and its parts that contact with materials are made of stainless steel materials, which can effectively reduce the chemical action of the contact surface of separated materials and equipment parts during separation to avoid corrosion and meet food health requirements. After material separation, supernatural liquid shall be discharged from centripetal pump, such as sand pump or shear pump. Requirements on material inlet pressure are relatively low. Automatic controller is adopted by the centrifuge to control piston action for regular automatic sludge discharge. PLC automatic control is applied to sludge discharge process control, which is characterized by strong adaptive capacity for process adjustment, high automation degree and convenient adjustment. Labor intensity is relatively receded and the requirements on solid impurity content of separated liquid is wide (solid impurity content shall be less than 5%). Fluid coupling is adopted by power transmission, thus the speed increase is steady, which can avoid overload. The decanter centrifuge is overall characterized by stable operation, low noise, strong separating capacity and high degree of automation.
The third one is about three-Phase Centrifuge, which is the core equipment for the whole water based mud unit and slurry oil recovery unit. Three-Phase Centrifuge could be used to separated water, mud and oil from the solids. About the three-phase centrifuge, you can learn more information by reading this post: What's the Three-Phase Decanter Centrifuge.
About the water based mud unit and slurry oil recovery unit in WestPetro, we will share more videos next week after we have tested the big two units. And if you are interested in our solid control system and drilling waste management unit, and some other solid control equipment, such as mud cleaner, vacuum degasser, cutting dryer, etc. please feel free to contact westpetro, we will always here to support you.