Chinese RussianSpain

News

Home > News > VSM shaker and Derrick shaker operations

VSM shaker and Derrick shaker operations

Posted by:    Time:2015-02-09     click:

The VSM shaker as well as Derrick shaker is first used in the late nineties along with some other devices to clean the inner walls of the oil wall. The first, and, so far, only use of VSM shaker as well as Derrick shaker in the oil drilling industry lies in the oil shale project at Queensland, Australia. The project is mainly invested by a Canadian firm and the VSM shaker as well as Derrick shaker is designed to deal with more than four thousand bbl. /d of shale oil from 6000 t/d of oil shale. Commissioning of VSM shaker as well as Derrick shaker has began about five years so that there are less problems with the retort and other equipment at present, which is especially true in the case of VSM shaker as well as Derrick shaker oil shale dryer. Although VSM shaker as well as Derrick shaker operations might be difficult throughout the life of the of this project, by the end of 2016 the plant will be run up to 110 days without stopping and will produce more than one point three million barrels of high quality oil. Production VSM shaker functions rates with the help of VSM shaker as well as Derrick shaker will reach about eighty percent of the nominal capacity while the oil recovery ratio will have touched ninety four percent of targeted design thanks to the VSM shaker as well as Derrick shaker.

The high quality oil can be sold as feed to refineries and as heating oil in many parts of the world at high prices and there will not be complaints from neighbors about odor and noise since the VSM shaker as well as Derrick shaker helps to remove the pollutants. Some experts have launched a persistent campaign concerning the project since its environmental effects VSM shaker functions and the release of greenhouse gases is not so huge due to the use of VSM shaker as well as Derrick shaker. Some companies try to acquire the project’s assets through a new company so that a large quantity of oil shale can be carefully crushed and dried to the plant’s design specifications along with VSM shaker as well as Derrick shaker. When processing this VSM shaker as well as Derrick shaker feed material, the retort can fully achieve its design capacity as well as expected oil recovery efficiency. This is mainly because the VSM shaker as well as Derrick shaker retort is a vertical shaft kiln in which coarse oil shale moves downward through the vessel. In other words, the crude oil can be gradually heated to the desired retorting temperatures in a rising stream of hot gases with the help of VSM shaker as well as Derrick shaker.


  • Label: