The mud gun working principle is impacting the deposit in the bottom the circle tank by the power provided form the three cylinder pump and centrifugal pump. And then, the mud gun which works with stack sizer will mix the drilling fluids stirred by the stirring of the stir. Also, it can be used to clean the sand at the tank bottom. Here are the main technical parameters of the mud gun. The output volume of the type NQ-80 of the mud gun is 55 square meters per hour. And its mass weights 55kg.
Then, it is the application and mud gun working principle of the type of NJQ-50. This type of the mud gun is the most important component of the drilling fluids solid control system. The function of the mud gun which works together with stack sizer is stirring the drilling fluids in the stirring fluids tank by the power of the centrifugal pump. It can corner that cannot be stirred by the stir machine, so the drilling fluids can be mixed completely. Also, it can be used to clean the mud that precipitates at the tank bottom. The construction of the mud gun is consisting of the moving adjusting lever, foreign flange, the moving adjusting body, the jerk.
The mud gun working principle is not difficult. The mud gun goes out from the sprayer after being driven by the pressure from the centrifugal pump. And then it stirs the drilling fluid when being driven by the turning handle and cleans the precipitated sand at the tank bottom.
About the mud gun features and main parameters, the mud gun operates by the principle of rolling bearing which can turn flexibly. The sealing of the mud gun adapts the sealing forms of the under-well equipment that can be operated for a long time and has a great sealing. The main parameters of the mud gun that works with stack sizer are as the follows. The mud gun can be turned from the angle from zero arcs to three hundred and thirty arcs. The operating pressure of the mud gun is under 6.4 MPa. The output of the mud gun is 55 square meters every hour and it weighs 65 kilograms. It is measured that the diameter of the mud gun is 50 millimeter.
When knowing the mud gun working principle, you have to know how to equip the machine and how to maintain it.
The equipment of the mud gun, you can put the mud gun which works with stack sizer in the drilling fluid tank directly and connect the import flange with the mud gun pipeline. The output of the sand pump should be connected with the mud gun pipeline to provide the drilling fluid to the mud gun conveniently.
To maintain the mud gun and the stack sizer, the mud gun and the stack sizer have to be oiled every three weeks and the lubrication has to be added to the sealing part at least once. You should inspect the connection of the pipeline and the flange regularly to see whether the bolt is loose or not. If so, you should fasten the bolt in time.