Solid control system, which is a system utilized to separate solids, such as sand, detrital rocks and so on, from the liquid oil in order to maintain the property of the drilling fluid and store the circulatory drilling fluid, is widely taken advantage of in different kinds of industries, licensed field drilling, exploration for coal, no-dig engineering, for instance. Do you know the relationship between solid control system and mud cleaner? The heavy-duty mixing device, potting equipment and chemical filling device are assembled in the solid control system , which are used to improve the physical and chemical properties of the drilling fluid so as to satisfy the requirement of the drilling work. For example, one of the equipments of the solid control system is mud cleaner which is desanding, except mud machine cleaner. Mud cleaner is two, three solid control equipment, which is in addition to mud and grit removal cyclone and the cyclone underflow shaker together, three to one.
The drilling process of fluid from two thousand meters to seven thousand meters urgently requires solid control system which is assembled by three to seven tanks modularly combined. One of the modular tanks is purification can which adopts new conical structures and the edge of the purification can uses the mud mix system so that it is uneasy for the gravel to sink. What’s more, in the whole circulatory system, modular tanks can be separated from each but also can be combined with each outer, so can numerous cabins. That’s why well drilling is easier to accomplish than before. What is the most important is that valve in the bottom of the suction manifold can be flexibly open but reliably sealed when closed. Amazingly, level 5 purification equipments must be equipped in the circulatory system with various corollary equipments, such as a vibrating screen, a cleaner for removal of soil and sand, a vacuum degasser, mixing equipment and so on. However with the quick development of the technology, the higher and higher requirements and the hot appeal for the green and sustainable development, solid control system has experienced numerous transformations and the brand-new solid control system can decrease the emission of the mud so that it is obviously environmental friendly.
There is no denying that the application of solid control system is the most important part of the fussy processes of the fuel and there is no doubt that the oil produced through the solid control system is much clearer than other. Furthermore, with the solid control system, the work of the separating the solid from the liquid oil becomes much easier and more accurate. And the use of the mud cleaner is also bringing great benefits with solid control system. The handling capacity has been strengthened, drill cuttings separation efficiency has been improved, simple structure, low cost, mobile relocation, easy to install and use.
Generally speaking, for the producers of the oil who lay more attention on the interest, they cannot reject the amazing solid control system which is efficient, economical and environmental friendly.