Chinese RussianSpain


Home > News > The Ideal Machine for Drilling Holes

The Ideal Machine for Drilling Holes

Posted by:    Time:2014-01-14     click:

During drilling holes, sometimes the cost of the drilling fluid is even higher than the drilling equipments themselves. Thus, it is significant to recycle some of the drilling materials, which will save a large amount of money. The decanter centrifuge is made to recover rocks and drain off water of the drilling engineering all over the world which needs the best separation of the solid as well as the liquid. Because of this, the ideal machine is the DE-1000 decanter of American and GNLW363VFD in China.

1.DE-1000 Decanter Centrifuge

The de-1000 decanter centrifuge centrifuge is installed on a solid and convenient brake that has a two point sewage disposal which has a brief installation. The entire revolving package components are made of materials that have corrosion resistant feature such as stainless steel alloy materials with high intensity. In addition, the heads of both of the Liquid and solid bowl are manufactured from overseas countries. As for the centers of the bowls as well as the conveyors, they are built according to the centrifugal function. The power is offered by an anti-explosion motor with fifty horsepower through a hydrostatic pump and the conveyor with a spiral differential mechanism. On condition of solids loading with high density, the spiral differential mechanism may offer at least forty five horsepower to lead the conveyor. As for machines that have large solid volume as well as the high speed, it is necessary to equip with at least forty five horsepower which is enough to lead the bowl. The large radiator that requires fans to cool must be made of corrosion resistant materials to guarantee normal drilling operation without any troubles even in extreme poor environment that may corrode the radiator.

2.GNLW363VFD Decanter Centrifuge in China

GNLW363VFD centrifuge is made with high speed which can replace the DE-1000 decanter centrifuge, the speed of the GNLW363VFD centrifuge is going to achieve three thousand and two hundred PRM to reach a better feature, which can make sure better operation. The power distribution is that the main power offer fifty HP and the deputy power has ten HP to lead the bowl of the centrifuge and the discharge motor has ten HP to fasten the centrifuge. What’s more, the speed of the GNLW363VFD centrifuge can be adjusted according to the belts. The changing range is from zero to three thousand and two hundred RPM through vacuum fluorescent display.

The main difference of the DE-1000 decanter centrifuge as well as the GNLW363VFD decanter centrifuge is the driving mode of them. DE-1000 decanter centrifuge adopts full hydraulic conveyor, while the GNLW363VFD decanter centrifuge uses electric and belt conveyor. Both of them is a efficient way during drilling hole, and you may find that the GNLW363VFD decanter centrifuge is a little more economical compared with the DE-1000 decanter centrifuge.

Featured Products: king cobra screen | derrick shaker | shear pump

  • Label: