Chinese RussianSpain

News

Home > News > Teach You How to Use Mud Agitator Correctly and Safely

Teach You How to Use Mud Agitator Correctly and Safely

Posted by:    Time:2014-05-06     click:

How to use mud agitator properly? That we must first understand its purpose and scope: Series mud mixer is widely used in a wide range of industrial and municipal wastewater treatment plant aeration tank, aerated grit chamber can also be used for small-scale sewage treatment plants, industrial wastewater treatment and fish farming oxygen tank, also apply to sewage treatment plants and industrial processes stirred liquid containing suspended solids.

Of course, we cannot ignore its conditions of use, so that we can solve the problem of how to use the mud agitator. Conditions of operation: Maximum media temperature is 40 centigrade, the transmission medium PH range is 5-9, the largest liquid density: 1150 kg / m, the minimum immersion depth: 0.9m, every second start intervals of not less than 10 minutes. Only gain a clear understanding of the data, the problem how to use the mud agitator can be solved.

If you are already familiar with the basic constitution mud mixer, then back on how to use the mud agitator skillfully can become a very simple problem. Mud mixer composed by the motor and the pump head, head coaxial with the motor, using two mechanical seals. Mud mixer composition can be set according to need in the submersible mixer oil chamber leak alarms, motor winding and bearing temperature protection overheating protection function.

How to use the mud agitator correctly? You have to understand its control equipment; The submersible mixer device is used to start, stop, and monitor the operation, according to different user requirements may include control cabinets, terminal boxes, level controllers, and with overload, phase, short circuit, leaks, motor winding temperature, bearing over temperature protection.

Precautions for the use of mud mixer can help you more clearly understand how to use the mud agitator properly and safely. First, check whether the selection of drilling fluid mixers is correct, and whether the actual conditions of use are consistent with the specified conditions of use. This is the first step to learn how to use the mud agitator correctly and safely, or you will make unnecessary losses and even worse conditions.

Secondly, the mud agitator motor has two hard steel and metal cable protection hose mud cabin. Make sure to seal tube connection. Do as the tips mentioned, you can quickly control how to use the mud agitator safely and correctly.

Thirdly, you should check the motor three main cable wire insulation resistance is not less than 5 megohms, and Megger is forbidden to use to check the control cables in order to avoid damage to the electrical components inside the submersible mixer, you can use a multimeter to check and control cable as a replacement. You can find it easy to guarantee safety on how to use the mud agitator.

Moreover, the mud mixer grounding line color line (yellow / green), in order to ensure safety, must be connected securely, and grow than other lines 50mm. It is a simple and easy way to keep safe and help you to learn how to use the mud agitator quickly and in good preparation.

Featured Products: mud cleaner | mud gun

  • Label: