Chinese RussianSpain

News

Home > News > Some Basic Knowledge About the Sand Pump

Some Basic Knowledge About the Sand Pump

Posted by:    Time:2014-01-28     click:

What is a sand pump ? Officially, that is a unit which is used in oilfield and some other applications. It can move the solid material from one place to another, ant it is usually the effective way that is agreed. The working principle of the sand pump can be described as a centrifugal motion. So, usually the sand pump is also in the classification of centrifugal one.

By using a textured or grooved disc work can the sand pump work. A central axis rotates around the disc, thus making a force to work. The movement is forced by the action of material the grooved disc comes into contact with, due to the action of drawing created by the grooves.

A sand pump can be castoff in a quantity of different illustrations and change numerous diverse elements, but they are denoted to as sand pumps because they are most often used to move gravel payments from one point to another. Sand pumps are generally located in watery or grease tanks that have recessed or become full with sand. And then transfer sand over a series of pipes and junctions. They may perhaps even move powder through other pushes that may be fused to conserve the material burden through the whole of the structure.

Sand pumps are most frequently used in organisms that move things a long expanse. The sand pump becomes essential for the piping in these systems can become bound with the materials if the burden at the end of the system is not enough to thrust the material through the end. Impels being placed in classification for use in longer systems also provide a way to discharge the first pump of the heavy work load these types of pumps often suffer.

The aids of using sand pumps to move rock-hard materials from one place to another through a penetrating system often overshadow the distinctive cost of one of these systems, in large part because moving solid earthly materials involves either manual or motored equipment. The comfort of use and continuous bid benefits once the system is installed and united also are a value.

There are weaknesses to these systems as well. Moving sand at in elevation pressures or speeds often poultices the abrasive constituents and routines them against the disc. This grinding feat often results in the disc lacking additional in long-term tenders, and may also require the taster of liquid to the system to make the material more pliant as it moves through the system.

Featured Products: VSM shaker | solid control system | mining screen

  • Label: