Chinese RussianSpain

News

Home > News > Mud Agitator Application for Drilling Fluids Recycling System

Mud Agitator Application for Drilling Fluids Recycling System

Posted by:    Time:2015-01-23     click:

Mud agitator is in order to maintain uniformity of drilling fluid and the solid phase particles suspended, and for continuous and reliable drilling mud of drilling fluid Mud agitator. It is mainly used for drilling fluid mixing, in case of drilling fluid solid phase particle deposition in the tank circulation system; make the circulating drilling fluid performance is stable, homogeneous mixing. So mud agitator application for drilling fluids recycling system is very important.
The characteristics of the mud agitator application for drilling fluids recycling system

1, The circular cylindrical worm reducer, as well as the shaft section for circular cylindrical worm and worm gear tooth profile for conjugating with worm round, can be used to make the performance of the convex-concave meshing reliable, high efficiency and compact.

2. When it is combined with explosion-proof motor with reducer, it is easy to be maintained and is suitable field use even under the harsh operating conditions.

3, it has stirring intensity, spread to a wide range, and reducing the starting resistance moment.

4, the motor is in horizontal, installation, adjustment, easy to change.So the mud agitator application for drilling fluids recycling system should be used.Mud agitator structure and working principle

Structure: this device is mainly composed of explosion-proof motor and reducer, frame and Bolo components, motor and reducer, gear reducer and wave wheel shaft are connected through rigid coupling. Bolo composed of four leaf compound. So the mud agitator application for drilling fluids recycling system should be applied.Working principle:

Bolo can make the mixing fluid produces eddy motion, thereby enhancing the mixing effect. Sandwiched between blade tray also can prevent mud solid phase particles deposit on the lower leaves after downtime, such use can reduce the sediment of the blade when starting resistance moment, thus avoiding the overload and burn out motor starting. So the mud agitator application for drilling fluids recycling system should be applied.
Mud agitator installation and maintenance

1, the slurry blender when installation should be lifting mixer and placed in the position of the desire to install smoothly, adjust the coaxial degree < 0.39 mm will be 4 M16 hole only after welding on the tanks, fixed and tighten mounting bolts.Rigid coupling must be equipped with

2, Mud cleaner trampoline and should be solid and reliable; otherwise it will cause a wave wheel shaft deflection, intensifying gear wear and tear.

3, mud mixer blender running should be the same in the ring, cassettes, the high temperature anomalies. Otherwise should stop check, troubleshooting.

4, mud mixer reducer oil level height should be kept in the central visual oil window position, the work can often make up of lubricating oil. It is recommended to use 120 # industrial gear oil. When the site cannot meet, it also can use other size appropriate lubricating oil. So the mud agitator application for drilling fluids recycling system should be applied.

The mud agitator application for drilling fluids recycling system is really friendly to ecology. It will reduce the emission of carbon to the environment and improve the energy efficiency.  Since it has so many advantages, we should take full advantage of it and apply the mud agitator application for drilling fluids recycling system to the industry age.

Faetured Products: shale shaker | Desander



  • Label: