Chinese RussianSpain

News

Home > News > Information About Steel Frame Screen

Information About Steel Frame Screen

Posted by:    Time:2014-11-12     click:

Shaker screen is mainly composed of desilter, vibrator, hanging device and motor, etc.

Machine through the v belt, drive vibrator of spindle, due to the vibrator unbalance weight on the centrifugal force effect, make the vibrating screen box. Change the vibrator eccentric, different amplitudes can be obtained.

Layer coated with phosphor, when electronic impact screen gives light, it can show the waveform or image, BSV LCD splicing technology adopt LED backlight achieving a uniform color display, etc.

Tablet PC interface of reading and writing.

The computer screen is the window of the human and computer interaction, all visual operation is presented through a computer screen. Computer screen capture [1] is a detail part of human-computer interaction. Will the screen of the computer screen in the form of pictures. A part of the tube and shell. Layer coated with phosphor, when electronic impact screen gives light, it can show the waveform or image, BSV LCD splicing technology adopt LED backlight achieving a uniform color display, etc.

p> Television, or radar receiver or similar instrument display panel of image or pattern, screen layer coated with phosphor, you should know the steel frame screens when electronic impact screen gives light, it can show the waveform or image.


LED display is installed outdoors, and often, the wind dust cover, poor working conditions. Electronic equipment is wet or seriously be affected with damp be affected with king cobra screen will cause a short circuit or even fire, fault and even fire, loss. LED display may be limited by lightning caused heavy current strong magnetic attack. 2. The environment temperature changes greatly. Display itself will generate a certain amount of heat at work, if the environment temperature and heat dissipation, integrated circuit may not work properly, and even destroyed, so that the display system cannot work normally. (3) at a wide, line-of-sight requirement, vision requires far and wide; Change of ambient light, and in particular may be direct sunlight.

Common faults 1. motor regulated 2. different sound 3. raw material can't automatic discharge 4. fine netease damaged 5. nesting boxes exports cracked

Daily maintenance: 1. before the start of: check whether there is any damage on the coarse mesh and fine mesh, each group clamps is locked 2. start: pay attention to the presence of abnormal noise, power supply is stable, vibration has the same shape

Daily maintenance

Before the start of: 1. Check whether there is any damage on the coarse mesh and fine mesh. (2) each group clamps is locking (3).Check vibration sieve box, v-shaped ring to see if there is any breakage, if there is any breakage need to repair in time, prevent leakage material.

Second, the startup:

1. pay attention to the presence of abnormal noise, current is stable 2. vibration has the same shape 3. use: after the clean after each use.

Frankly speaking, shaker screen is worthwhile to know and understand.

Featured Products: de-1000 decanter centrifuge | 518 centrifuge


  • Label: