Chinese RussianSpain

News

Home > News > How to install shear pump?

How to install shear pump?

Posted by:    Time:2014-07-04     click:

The requirements of high-performance mud are suitable for the shear pump. Effective mixing, full hydration in the drilling fluid to add material saves the use of materials, shorten the time of mud configuration, and provides good mud performance for drilling process. So how to install shear pump is a key step.

The hydration degree of soil particles can be improved by shear pump. Moving the soil particles dispersed in water and hydration degree depends on: the water content of electrolyte, time, temperature, surface displacement quantity and the concentration of section. The same situation in other conditions, how to install a shear pump is a question that you should think about, because that means you can save betonies by more than 30% and can make the polymer drilling fluid shear pump shear dilution, hydration as soon as possible. Mud used in the molecular weight of polymer is higher, and directly add to hydration, therefore to polymer need to shear. The cutting efficiency of shear pump is high, so the process of dilute polymer and hydration can be accelerated. It can provide higher capacity and shear pump head, can satisfy the requirement of mud preparation and processing. This machine is very important for both merchants and consumers so that they should be cautious when they choose it.

What is shear pump function?

1. The hydration degree of soil particles can be improved by the shear pump. Move the soil particles dispersed in water and there are many factors that have a great influence on hydration degree: the water content of electrolyte, time, temperature, surface displacement quantity and concentration of caption. Other conditions in the same situation, the use of shear pump can save pen betonies by more than 30%.

2. The polymer shear can be diluted and hydrated by it as soon as possible. The mud used in the polymer molecular weight is higher, directly add to hydration, therefore to polymer need to shear. The cutting efficiency of shear pump is high, so the process of dilute polymer and hydration can be accelerated.

3. The shear pump can provide higher capacity and head can satisfy the requirement of mud preparation and processing. Under the condition that drilling market competition is intense; it greatly shortens the slurry preparation time and will bring good economic benefits.

Therefore, how to install reasonably shear pump is of vital importance for people.

As everyone can see, shear pump is an objection with complex structure. How install shear pump is a key issue for ordinary people. If people buy shear pump, they should install shear pump as the instruction literately. We should clean all parts, especially the O-rings seal groove, thread, bearing and bearing lubrication, cleaning. Packing gland cannot twist too tight, otherwise may cause packing burn out when the pump running.

Featured Products: centrifugal pump | solid control equipment

  • Label: