Mud cleaner is an all-in-one cleaner to desand and desilt. Mud cleaner is secondary and tertiary of drilling mud solids control equipment, it is the cyclone desanding and desilting cyclone and underflow vibrating screen, three to one. Mud cleaner structure is compact, small footprint area, powerful, is to secondary and tertiary drilling mud solids control equipment the ideal choice for efficient cleaner. Many people may not know how to choose mud cleaner, and we are going to tell you.
Our mud cleaner includes the desander, desilter, pressure pump, cyclone, underflow trough, drilling fluid shale shaker , bracket and base. Its characteristics lies in the desander and desilter main into the pipe and the liquid between a control butterfly valve, the base is equipped with the chute, and the vibrating screen is located on the chute. Cyclone with automatic sand control device and bottom is adjusting device. The new structure of the mud cleaner is compact, easy to use, easy maintenance, reliable operation. The mud cleaner can quickly remove harmful solid phase of drilling fluid, improve drilling fluid performance, to meet the requirements of the new technology of high pressure jet drilling. That’s why you have to choose our mud cleaner.
Mud cleaner is characterized by cyclone group by 1-3 high wear-resistant polyurethane and 8-16 desand hydrocyclone high wear-resistant polyurethane cyclone, which are all arranged combination. The overflow pipe and the feeding tube diameter is larger, while the cone angle is smaller; Mortar adopts a center shaft fixed that can tilt the metal tank to control the flow of slurry; Circular permutation group of hydrocyclone is using the rectangular recovery of vibrating screen. Due to the above characteristics of the utility model are enhanced ability to deal with mud slurry, drilling cuttings could improve the separation efficiency with its simple structure, low cost, fast move, install, etc. So choosing our mud cleaner is a good choice.
The working principle of your choosing mud cleaner:
After a cyclone desanding device or mud cyclone separation, the overflow return mud will come back to the solid control system . Then there will be a further process, when necessary, the vibrating screen with mud cleaner vibrating screen can be as a former level.
Choosing mud cleaner main structure:
Mud cleaner is mainly consisted of cyclone desander, desilter, pressure pump, cyclone, underflow trough, drilling fluid shale shaker, bracket and base, etc.
1. The main structure of mud cleaner is using upper and lower two pieces of decorate, cyclone desander, desilter is decorated in the upper, the base is equipped with the chute, decorate a shale shaker on the chute, the structure is compact, small footprint area;
2. The desander and desilter main into the pipe and the liquid between a control butterfly valve can adjust the desander and desilter job number at any time, the operation is simple and easy to maintain;
3. The special polyurethane cyclone is in wear-resisting material, which has good corrosion resistance and high resistance to fluid flush advantages;
4. The inlet tangential feeding, smooth transition, is conducive to improve the efficiency of separation, the inner surface is smooth, reasonable flow;
5. Different number of the mud cleaner and can according to user requirements of cyclone desanding and desilting cyclone.