Chinese RussianSpain


Home > News > Heating Process in Desilter and Brant Screen

Heating Process in Desilter and Brant Screen

Posted by:    Time:2015-02-03     click:

If we inject where to buy desilter as a drive in the residual oil and gas, it will lower the temperature of subsurface formation. This is mainly because the cold water heated by the where to buy desilter subsurface stratum is recovered through other wells, which can be used in another well network after disposition. According to scientific research results, three where to buy desilter ways can be adopted to transfer the heat to oil shale and microwave Brant screen heating technique has the advantages of strong penetration as well as high heating speed and efficiency in where to buy desilter. This method is also marked with real time heating and integrity since it represents the heat rapidly when taking micro wave to heat Brant screen materials. To be more specific, micro wave radiation in where to buy desilter can be used to promote polarity molecules to move in a severe manner since molecules tend to collide and rub with each other. The heating process in where to buy desilter takes place in the whole object in a simultaneous manner with quickness in terms of temperature rise, uniformity and gradient.

The high efficiency of where to buy desilter energy consumption mainly reflects that medium Brant screen materials can absorb micro wave and change it into heat energy in a direct manner. Micro wave heating in where to buy desilter requires no heat conduction with its good selectivity so that it can play different roles in different materials. With turning off the Brant screen micro wave source in where to buy desilter, micro wave energy is unavailable so users can control the temperature of oil shale in an accurate manner. The crack of oil shale in where to buy desilter by micro wave heating will increase the fractures, which contributes to the transmission of microwave and helps to expand the ; heating area and the discharge inside the oil shale resources. What is more, by heating shale oil in micro wave, the overall heating rate can be easily adjusted in spite of the fact that conventional methods require a quite long time to reach the predetermined temperature in where to buy desilter. The use of where to buy desilter might also lead to longer cooling time when the heating is stopped and the status of oil shale will change as the output power of micro wave where to buy desilter is regulated in the critical liquid driving process. The oil industry equipment drills and sends radio frequency can be vastly different since there are many Brant screen fluids that are pumped to ground to condensate and storage in where to buy desilter.

  • Label: