Chinese RussianSpain


Home > News > Filter the Oil with a Professional Centrifuge

Filter the Oil with a Professional Centrifuge

Posted by:    Time:2014-01-09     click:

For ordinary people, perhaps the 518 centrifuge has nothing to do with their normal life. While in the construction sites, especially some heavy industries, the oil centrifuge especially 518 centrifuge has great importance to the whole manufacturing process. Since oil becomes one of the irreplaceable energy resources in human being’s life, the every single step in no matter oil gathering or oil producing is in the careful protections and consideration. It is such a huge project that there must be not any trivial mistakes in every process. So both the manager and the operator of the oil related machine have to know something about the operation direction and basic knowledge about it.

The simple explanation about the oil centrifuge is necessary to introduce before you actually operation the large-scale machine. The components and the basic parts of the professional are all the exquisite and fine fundamental part to the entire product. As the most common used one like 518 centrifuge in the industries, the regular check every time before you open it is surely necessary. You have to make sure the separating suspensions have no any abnormal conditions happening on them. The first process might relate to a few stuffs. Normally, the 518 centrifuge consists with a central rotor which is used in the wells to hold the tubes or other container connecting the machine. Those tubes are usually placed near or under the big “central head”.

Another thing you have to be familiar with is that the in the well are enough for the pressure. This is often certified by the professional workers or other experts in the team. In addition, the environment around the construction site has to be taken great care of. Since the site is really a dangerous place for the residents around. The machine might cause a lot of sound when it works, therefore you could not notice the kids or other people get in. So the protection and the inspection before the work begins are highly required.

The central idea of the centrifuge can be interpreted in a simpler way. We all know that when some kinds of liquids mix together, it’s hard to separate them from each other. In the 19th century, some scientists came up the idea that to split the mixture taking advantage of the difference of the density of the different liquid. Since the density of the oil is smaller than the water, it is easier to separate the oil from other liquid easily especially from water. In this way, the raw oil can be extracted from the basic products of the first process, which make the later work much simpler and easier. The further instructions about the certain type of the machine like 518 centrifuge, you have to refer to the specific guide book.

Featured Products: VSM shaker | mongoose pt screen | desander

  • Label: