Chinese RussianSpain


Home > News > Details About the Main Parts of Mud Cleaner

Details About the Main Parts of Mud Cleaner

Posted by:    Time:2014-01-11     click:

One of gears of mud cleaner is cyclone separation as typical grading gear. And what are the main parts of mud cleaner? The functioning basic principle of the cyclone separation is centrifugal sedimentation. In particular explanation, when the two levels of mixture to be divided from the surrounding tangentially cyclone into the cyclone afterwards with some stress, generating a powerful 3-dimensional elliptic powerful rotational shear turbulence. Mainly due to the fact that the distinction of sizing exists among the good component and coarse component and these are subjected to the distinction of centrifugal force, the buoyancy of the heart, fluid drag force and is below the impact of centrifugal sedimentation. Big coarse component is discharged via underflow tube although most good component is discharged from the overflow tube so as to accomplish the objective of separation.

When it arrives to the tip of the procedure of the cyclone separation which is a component of the mud cleaner, here we are. Firstly, prior to the begin of the cyclone device analyze, employees have to make certain that all interconnections are tight and eliminate the wide range of residues in the pipe and tank team so clogging and leaking cannot occur when make the motor start. What's more, regardless of whether the valve placing into force is completely available or not should be verified severely. Secondly, the valve can be completely open or completely closed, but the valve can by no means be permitted in a semi-open state. In other words, employees are by no means permitted to use the valve to manage the flow. Thirdly, if feasible, please analyze with water. Cyclone feed can be pumped or offered via the substantial slot. If the pump and cyclone match, the appraise exhibits a continuous studying. Workers should make sure that the appraise fluctuate. If not, the employees have to verify the result in of the considerable fluctuations. And the gear needs to perform below stress in not more than 0.3 Mpa. Fourthly, when gear is operating smoothly at ordinary stress, the interconnection stage of the quantity of the leakage should be verified in order to carry remedial activity when required. Fifthly, verifying the blockage resulted in by the residue in the cyclone is most required. The blockage in the cyclone feed inlet will result in overflow and the decrease of the grit flow. The blockage of the cyclone spigot will also decrease or even cease the flowing grit occasionally with violent shakes. If blocked, cyclone feed valve have to be promptly closed and the blockage have to be eliminated right away. To avoid clogging, the set of hydro cyclone feed tank can include services to avoid precipitation of coarse materials and debris and at the same time employees park in a timely method when the feed tank is drained to avoid leading to blockage by substantial concentration. The final but not the least, when water analyze confirms the equipment is operating well, the employees can enter in the slurry and operate the appliance.

Contemplating the fundamental facts of the cyclone separation gear and the operating tips, the employees have to treatment completely use this appliance in the use of the mud cleaner. The extended existence the cyclone separation gear has, the far better circumstance of the mud cleaner has so that employees should carry treatment of the appliance severely subsequent the operating tips of its.

Featured Products: VSM shaker | stack sizer | derrick shaker

  • Label: