Chinese RussianSpain


Home > News > Brief Introduction to Choose Solid Control System

Brief Introduction to Choose Solid Control System

Posted by:    Time:2014-12-15     click:

Choose Solid control system is composed of the following sections:
Hopper, choose solid control system, usually referred to as the "base" used as a table and the tray by vibrating screen-processing fluid, also known as the "overflow" both platforms. Hopper can be according to the drilling fluid when solid control systems also known as “mud” need sorting system. It can have different depth to hold more quantity of drilling fluid and the different port underflow returns to the mud system.

Feeder is basically by drilling a collection plate, before it is made up of vibrating screen, it can have many different shapes and sizes to accommodate the needs of the mud system. The most common feeder is called weir feeder, drilling fluid into the feed usually by pipe welded to the bottom of the feed when choose solid control system through near the outer walls, it fill the feed to a predetermined point and like the mud flow over a dam overflow weir and the vibrating screen (mud) screening area. Supply the method of vibrating screen is one of the most widely, due to it’s along the table, allowing maximum use of bed layer sieve area the entire width of the ability to use with uniform distribution of cement.

Some feeder can be equipped with the feeder; it allows the drilling fluid to bypass the sieve basket and directly into the funnel and return to the mud system and not from vibrating screen is processing on the shale shaker of the by-pass valve.

Sieve basket, also known as the "bed" of the solid control system screen, it is the most important part of the machine, it is responsible for the machine's vibration intensity, in "G" measurement, while keeping the "tic" movement, even in the whole basket. It must be done, and keep screen safety, avoid cuttings bypass hopper, and allows easy operation and maintenance of the machine. Rubber seal deck and selective vibrator arranged different ways to meet those needs when solid control system

Solid control system is one of the VSM shakers fishing mechanism plays an important role. Drilling fluid flows through the sieve bed are specified as two categories: Swimming pool, which is a sieve, by drilling fluid and drilling VSM shaker cuttings suspended in most of this area.

After the reading, if you still have double on the question of choosing solid control system, you are free to ask any question that you are not familiar with and we also recommend you to read some other articles in our website to get a whole grasp of the solid control system. And you are mostly welcomed to contact us if you have any other questions that we did not mention in the content above and it also is your desirable information, which you are eager to know.

Featured Products: Mud cleaner| Desilter

  • Label: