Chinese RussianSpain


Home > News > Basics Parts of a Functioning Centrifugal Sand Pump

Basics Parts of a Functioning Centrifugal Sand Pump

Posted by:    Time:2014-01-01     click:

A centrifugal sand pump make use of round force to proceed a fluid. A centrifugal sand pump is a fairly straightforward item of equipment. Transferring electric power powering the pump into kinetic power, an impeller within the pump spins the fluid within the pump chamber. As the pump impeller spins the fluid starts to proceed among the cavities of the impeller in the direction of the outdoors of the chamber. As this procedure persists the fluid builds up centrifugal force within the pump impeller, comparable to the force that keeps water in a bucket when it is swung close to it. This constructed force enables fluid exiting the pump to be pressurized. As large-pressure fluid exits the pump, new fluid could enter the pump and persists the procedure. And the main parts of centrifugal sand pump consists of the followings:


The casing of a centrifugal sand pump like the mission pump serves to home the impeller and produce a chamber for fluid to be pumped over. The drive items of a centrifugal pump also are homed in the casing.

Suction and discharge nozzles

Built into the casing alone, the suction and discharge nozzles serve as ports for water to move in and exit from, respectively. Usually, suction nozzles are positioned on the pump end and discharge nozzles are situated on its top.

Each seal chamber and stuffing box is referred to the portion of the pump among the shaft and casing in which the sealing mechanism of the pump is homed. Seal chambers make use of a mechanized seal, but stuffing bins accomplish the sealing objective via some type of packing. Regardless of the technique utilized, the chamber is utilized to avoid fluid from exiting the pump.

Bearing real estate

The bearing housing is utilized to enclose and defend the shaft bearings, ensuring correct alignment. The housing will also consist of some sort of technique for lubricating the bearings and let the pump cool down.


The primary relocating portion of the centrifugal pump, an impeller is a specifically created element vital for correct operating of the pump. Relying on the suction sort and mechanized building of the pump, the specific style and design of the impeller could possibly differ.


The shaft exchanges the electric or mechanized power powering the and pump straightly to the impeller. What’s more, the shaft is accountable for assisting any moving components on the pump. The shaft is accountable for an excellent offer of both power exchange and structural assistance and as a result should be very carefully machined.

Featured Products: shear pump | VSM shaker | mongoose pt screen

  • Label: