Chinese RussianSpain

News

Home > News > An Introduction of Mining Screen Frequency

An Introduction of Mining Screen Frequency

Posted by:    Time:2015-01-29     click:

With the shortage of energy and the rise of crude oil in the world, the development of solid control system for oil and mining screen is gaining more attention in the global arena. To solve the problem of traditional solid control system for oil and gas drilling as well as heat conduction, we may need to improve its working efficiency and reduce the high cost for oil shale. To achieve this goal, a new technology called radio mining screen frequency has been introduced in the solid control system for oil and gas drilling. In this kind of technology, a type of micro wave can work in a direct manner on the medium molecule of oil shale. Then the solid control system for oil and gas drilling can change into heat energy via the transmission that allows both inner and outer molecules to be heated in a simultaneous manner without any heat conduction. Meanwhile, oil shale can be got with the help of solid control system for oil and gas drilling since it is a poor microwave absorbing mining screen material. In other words, solid control system for oil and gas drilling absorbents must be added to reach a certain temperature.

By this means, shale oil could be heated at a higher speed in the solid control system for oil and gas drilling process and will gradually be cracked into gas and oil after three hours. Then shale oil and gas will flow into the solid control system for oil and gas drilling production wells through fractures that are generated by heating. Finally, the Shaker screen will be pumped up to the solid control system for oil and gas drilling surface. Another key point is the discharge of oil based drilling mud which is largely a chemical mixture. It can be used for rotary solid control system for oil and gas drilling in the extraction of oil and gas from the earth’s mining screen crust. This is essentially true since the solid control system for oil and gas drilling mud is a suspension of solids such as clays and small cutting in liquids like water or oil with some chemical additives. More detailed solid control system for oil and gas drilling fluids might be required in order to modify its properties such as the surface active agents and mining screen dispersants. The general functions of solid control system for oil and gas drilling mud include the lifting of formation cuttings to the surface as well as the controlling of subsurface pressures. It is also useful in the lubrication of solid control system for oil and gas drilling stings along the sides of the hole in mining screen cleaning and cooling.

Featured Products: sand pump | drilling equipment


  • Label: