1. Model: high standard, long service life
2. Bowl Diameter x Length: 450mm x 1000mm
3. Capacity: 60m3/h (SG<1.1g/cm3)
LW serial decanter centrifuge used in oil and gas industry
1. It has been granted 7 patents including a flow controller for adjusting and controlling the feed quantity of the centrifuge (ZL200720079860.4) and a main bearing seat of the decanter centrifuge used for drilling fluid-solid-phase control system (ZL200720080219.2).
2. LW serial decanter centrifuge has two control models of variable frequency and work frequency, and has abovementioned various decanter centrifuges devoted for ocean drilling platforms. The work frequency-driven decanter centrifuge can change its speed through pulley and belt change, and the variable frequency horizontal centrifuge can realize infinite speed variation in a large scope and its control cabinet can directly display the parameters of work rev., work current and torque. The engine may be suitable for power grids of 50Hz and 60Hz.
3. The roller and helix stowing tool, as the major components of the decanter centrifuge are designed independently by the company, and are made of stainless steel (American Steel No.: 304). All the welding lines are inspected and treated with certificate of conformity or record. And the gyrator will have the resistance to wearing and erosion, and the roller shield, segregation box, main transmission shield and auxiliary transmission shield are all made of stainless steel.
4. The helix vanes are made through bead welding, spray welding and modules to ensure the resistance of the decanter centrifuge to wearing and erosion, greatly improving its service life. It is equipped with dual overload protective devices for machinery and electric appliance for safe operation.
5. And it is equipped with the vertical or horizontal fluid-supplying pump designed and produced by the company, with the tools and reserves for equipment use and routine maintenance, with Chinese and English Users’ Manual and block diagram and explosion diagram, for users to choose the appropriate model, delivery, operation and maintenance.
6. It is a widely used model and the power frequency model is available in three types of rotation speed. It is suitable for most drilling fluid treating requirements and has the advantage of occupying a small area and convenient in installation and debugging.
|Inner diameter of bowl||mm||450|
|Active length of bowl||mm||1000|
|Max. rotation speed of bowl||r/min||2500|
|Active rotation of bowl||r/min||1800||2000||2200||≤2200|
|Differential speed of conveyor||r/min||17-36||≤44|
|Max. throughput (SG<1.1)||m3/h||40||45-50||50-60|
|Feed pump model||
||Centrifugal pump LSB23J, SB23J|
|Weight including the feed pump||kg||3400||3500||4000|
Have A Look Here And Find Other Quality Products: